Welcome to the official website of Nanyang Huaye Explosion-proof Instrument Co., Ltd!
Service Hotline:0377-61613169 | E-mail: abc@huayex.com
AWZD-10 non-explosion-proof junction box
The waterproof junction box used on the motor can be used as a temperature measurement junction box, heater junction box, transformer junction box, etc.
Classification:
Detailed introduction
1. Overview
AWZd-10 junction box protection level: IP66, mainly used for the connection of common motor centralized inlet and outlet signal lines. This product has beautiful appearance, complete specifications, easy installation, and is widely used in motors, machinery, and other industries.
2. Model meaning
3. Basic parameters
Protection level: IP66
Maximum working voltage/current of each terminal: 550V/15A;
The wire diameter range of each terminal is: 0.2mm2～2.5mm2.
4. Appearance and installation dimensions
4.1 AWZD-10
A: 
6. Installation, wiring and precautions
6.1 Open the junction box, unscrew the compression nut of the cable entry device with a wrench, firmly connect the cable to the terminal (or terminal) in the junction box, then cover the junction box and tighten the screws at the four corners.
6.2 The grounding screw on the junction box must be reliably grounded with a grounding wire.
6.3 When the sealing ring in the entry device is aged and deteriorated, it should be replaced in time.
6.4 Pay attention to protecting the sealing ring or sealing strip between the upper cover and the bottom shell; if it is aged and deteriorated, it should be replaced in time.
6.5 It is strictly forbidden to open the upper cover of the junction box with power on.
6.6 During maintenance, pay attention to tightening the rubber sealing ring in the entry device to avoid scratches or abrasions.
6.7 After the entry (exit) line connection is completed during installation, the upper cover should be fastened and the installation screws should be firm.
Key words:
AWZD-10
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Nanyang Huaye Explosion Protected Instrument Co., Ltd.
Professional manufacturer of explosion-proof temperature meters and temperature sensors and suppliers of motor supporting instruments
Professional manufacturer of explosion-proof temperature instruments and temperature sensors, as well...
24-hour service hotline
Mobile:+86-15093007079 / +86-13838705322
Address: Middle Section of 3# Road, 2# Industrial Park, High-tech Zone, Nanyang City, Henan Province
E-mail:abc@huayex.com
Fax:+86-377-61613132
Copyright©Nanyang Huaye Explosion Protected Instrument Co., Ltd. This site already supports IPV6 Business License