Welcome to the official website of Nanyang Huaye Explosion-proof Instrument Co., Ltd!
Service Hotline:0377-61613169 | E-mail: abc@huayex.com
BWZD factory explosion-proof junction box
Optional parameters Single junction box (without temperature sensor) Junction box with temperature sensor (platinum resistance Pt100) Junction box with 4-20mA temperature transmitter
Classification:
Detailed introduction
1. Overview
The explosion-proof junction box temperature sensor is specially developed by our company for the motor industry. It is a temperature sensor with an explosion-proof junction box, mainly used for temperature detection and control of bearings and cooling systems in explosion-proof motors. This product has high precision, good stability, and is characterized by shock resistance and durability, widely used in fields such as petroleum, chemical, pharmaceutical, and military industries. For temperature sensors used in nuclear power plant equipment, the lead wire is a special cable for nuclear power plants and holds a certificate of conformity from the National Wire and Cable Quality Supervision and Inspection Center. The shell material is lightweight alloy, with a surface coated with anti-corrosion paint or stainless steel.
Explosion-proof Principle
The BWZD series explosion-proof temperature sensors use an explosion-proof shell to isolate the circuit parts that may produce sparks or arcs from the combustible dust environment or explosive gas mixtures outside the shell, thus achieving explosion-proof purposes. The dimensions of the explosion-proof joint surface comply with GB3836.2 regulations, and the cable entry device complies with GB3836.1-2000 Appendix D regulations.
Explosion-proof Mark: ExdbIIB/IICT6Gb, ExtbIIICT80℃ Db.
4. Installation, Wiring and Precautions
4.1 When installing the junction box, check whether the explosion-proof mark on the junction box nameplate matches the installation environment.
4.2 The connecting wire should be selected as copper shielded cable, with a cross-sectional area of no less than 0.2 square millimeters.
4.3 Open the junction box, use a wrench to unscrew the compression nut of the cable entry device, securely connect the cable to the terminal (or terminal block) inside the junction box, then cover the junction box and tighten the screws at all four corners.
4.4 The grounding screw on the junction box must be reliably grounded with a grounding wire.
4.5 During installation, signal transmission lines should be fixed with ties at a distance not exceeding 300mm apart. If the signal transmission line is too long, it can be coiled at an appropriate position; do not throw it around randomly and keep it away from heating equipment.
4.6 The sealing ring in the entry device should be replaced in a timely manner when it ages or deteriorates.
4.7 The cover must not be opened in environments with combustible dust present; it is strictly prohibited to open the cover of the junction box while it is energized.
4.8 During maintenance, care should be taken to prevent 'explosion loss' (such as protecting dust-proof explosion-proof surfaces and paying attention to fastening and rubber sealing rings in the entry device).
4.9 The minimum outer diameter of cables used by users is φ9.
Key words:
防爆接线盒
防爆温度传感器
BWZD
BWZG
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Nanyang Huaye Explosion Protected Instrument Co., Ltd.
Professional manufacturer of explosion-proof temperature meters and temperature sensors and suppliers of motor supporting instruments
Professional manufacturer of explosion-proof temperature instruments and temperature sensors, as well...
24-hour service hotline
Mobile:+86-15093007079 / +86-13838705322
Address: Middle Section of 3# Road, 2# Industrial Park, High-tech Zone, Nanyang City, Henan Province
E-mail:abc@huayex.com
Fax:+86-377-61613132
Copyright©Nanyang Huaye Explosion Protected Instrument Co., Ltd. This site already supports IPV6 Business License